HOT NEWS
:  Now cash on delivery available for Rawalpindi Islamabad and Karachi Customers . Due to frequent currency fluctuation in Pakistan please confirm products price/availability before placing an order or depositing your amount. You can call us at +92 (21) 34980627 Cell +92 333 3165915.  Resellers and Companies contact us for whole sale prices. 

LINKSYS WAP4410N-EU Wireless Access Point Price in Pakistan Featured

Rate this item
(1 Vote)

Wireless Access Point

In Stock

Retail Price: Rs.15,200/-

Sahulat Price : PKR 14,600/-

 

Item ID :  # 1867

LINKSYS WAP4410N-EU Wireless Access Point

Specifications

Standards

Draft IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u, IEEE 802.3af (Power over Ethernet), 802.1x (security authentication), 802.11i security WPA/WPA2, WMM

Ports

Ethernet, Power

Buttons

Reset

Cabling type

Unshielded twisted pair (UTP) Category 5e or higher

LEDs

Power, Ethernet, Wireless, PoE

Operating system

Linux

Setup/Configuration

Web user interface

Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)

Management

Simple Network Management Protocol (SNMP) version

SNMP version 1, 2c

Event logging

• Event logging
• Email logging
• Remote syslog

Web firmware upgrade

Firmware upgradeable through web browser

Diagnostics.

Flash, RAM, LAN, WLAN

Dynamic Host Configuration Protocol (DHCP)

DHCP client

HTTP Redirect

Redirects initial user access to an external web server to display company logo or network usage policy

IPv6 host

• Support for management and control of access point over IPv6
• Supports RFC2460 (IPv6 protocol) and RFC4294 (IPv6 node requirements)

Network Capabilities

Multiple BSSID

Supports up to 4 BSSIDs, allowing the creation of multiple virtual access points

VLANs

Supports 802.1q - up to 4 VLANs

SSID to VLAN mapping

Supports mapping of SSIDs to VLANs to securely separate workgroups across wireless and wired domains

Spanning Tree

Supports 802.1d Spanning Tree Protocol to prevent loops when using wireless distribution system (WDS) links as redundant links in a distribution system

Operating modes

Access point mode, point-to-point bridge mode, point-to-multipoint bridge mode, repeater mode, wireless client mode

Load balancing

Allows bandwidth control with user-defined CPU usage ratios

Auto-channel selection

On boot-up, the access point selects the least congested channel

802.11d regulatory domain

Enables the access point to provide radio channel settings for client devices, facilitating easy client access as they move across regulatory domains

Security

WEP/WPA/WPA2

Wired Equivalent Privacy (WEP) 64-bit/128-bit, WPA-Pre-Shared Key (WPA-PSK), WPA2-PSK, WPA-ENT, WPA2-ENT

Access control

Wireless connection control: MAC-based

SSID broadcast

SSID broadcast enable/disable

Client isolation

Supports wireless client isolation between and within SSIDs

802.1X

Wireless clients can be authenticated through IEEE 802.1X

802.1X supplicant

Supports 802.1X supplicant on the Ethernet port to allow the access point to authenticate itself to the network

RADIUS server

Up to 2 RADIUS servers can be configured for redundancy purposes

WPS

Supports WPS, a WI-FI Alliance specification for simple and secure setup of a wireless network

Rogue access point detection

New access points detected that have not been categorized as known are logged as rogue access points, allowing the administrator to clamp down on unapproved devices in the network

Quality of Service

QoS

• 4 queues
• 802.1p VLAN priority
• WMM wireless priority
• Mapping of 802.1p VLAN priority to WMM wireless priority to maintain end-to-end QoS

Wireless

Spec/modulation

Radio and modulation type: 802.11b/DSSS, 802.11g/OFDM, 802.11n/OFDM

Channels

Operating channels: 11 North America, 13 most of Europe (ETSI and Japan)

Internal antennas

None

External antennas

3 (omnidirectional)

Transmit power

Transmit power @ normal temp range for FCC:

802.11b: 16 dBm @ 1TX, 19 dBm @ 2TX, 20.5 dBm @ 3TX

802.11g: 13 dBm @ 1TX, 16 dBm @ 2TX, 17.5 dBm @ 3TX

802.11n: 17 dBm @ 1TX @ MCS0~5/8~13, 13 dBm @ 1TX @ MCS6/14,

11 dBm @ 1TX @ MCS7/15, 20 dBm @ 2TX@MCS0~5/8~13,

16 dBm @ 2TX @ MCS6/14, 14 dBm @ 2TX @ MCS7/15,

21.5 dBm @ 3TX@MCS0~5/8~13, 17.5 dBm @ 3TX @ MCS6/14,

15.5 dBm @ 3TX @ MCS7/15

Transmit power @ normal temp range for ETSI:

11b/g/n: 13 dBm @ 1TX, 16 dBm @ 2TX, 17.5 dBm @ 3TX

Antenna gain in dBi

2

Receiver sensitivity

802.11.n: 300 Mbps at -69dBm

802.11.g: 54 Mbps at -73dBm

802.11.b: 11 Mbps at -88dBm

Environmental

Dimensions

W x H x D

6.69 x 6.69 x 1.60 in.

(170 x 170 x 40.7 mm)

Weight

0.86 lb (39 kg)

Power

• 12V 1A DC input, and IEEE 802.3af compliant PoE
• Max power draw: 10.1W

Certification

FCC, CE, IC

Operating temperature

32° to 104°F (0° to 40°C)

Storage temperature

-4° to 158°F (-20° to 70°C)

Operating humidity

10% to 85%, noncondensing

Storage humidity

5% to 90%, noncondensing

Package Contents

• Cisco WAP4410N Wireless-N Access Point with PoE
• User guide on CD-ROM
• Ethernet network cable
• Power adapter
• Product stands
• Registration card

Minimum Requirements

• 802.11b, 802.11g, 802.11n wireless adapter with TCP/IP protocol installed per PC
• Switch/router with PoE support or PoE injector when used with PoE
• Web-based configuration: Java-enabled web browser


Product Viewed 912 times
Login to post comments
You are here:   HomeNetworkingAccess PointLINKSYS WAP4410N-EU Wireless Access Point Price in Pakistan

Project of

Follow Us

FacebookGoogleLinkedinTwitterYoutubeDigg

OUR BRANCH

KARACHI Shop 18, 19 Saleem Avenue opposite Baitul Mukarram Masjid, 13-B, Gulshan-e-Iqbal.
+92 21 34980627.
+92 333 3165915.